A glucose display continuously shows, on a small screen placed somewhere in your home, the value sent by your continuous glucose monitoring sensor (Dexcom, FreeStyle Libre…). No more unlocking a phone: a glance is enough. If you're looking for one, you've probably come across two worlds: build-it-yourself (DIY) solutions and ready-to-use displays. Here's an honest comparison, followed by the criteria that really matter.
What is a glucose display?
It's a secondary screen that retrieves the glucose value already shared by your sensor's official app, via the Internet, and shows it in large digits with its trend. It doesn't measure anything itself: it adds no sensor and replaces neither your reader, nor your receiver, nor the official alerts. It simply makes the information visible in the right place: on the bedside table, below your office screen, in the living room or in a child's bedroom.
Who is it for?
- People with diabetes who want to see their glucose without taking out their phone (and without ending up on social media every time they check).
- Parents of children with diabetes, especially at night, to keep an eye on glucose from their own bedroom.
- Loved ones (partner, grandparents, teachers) who want reassurance without asking question after question.
Real-life situations: at the office, without taking out your phone · when you live alone · at the grandparents' home · for an elderly parent.
DIY or ready-to-use?
The DIY solution
Open-source projects let you show your glucose on a small programmable screen, often based on Nightscout. It's a perfectly valid route if:
- you're comfortable with technology (flashing firmware, configuring a server, troubleshooting on your own);
- you have time to install, test and maintain the solution;
- you already use Nightscout or a DIY ecosystem.
The advantage: the raw hardware cost is low. The drawback: everything depends on you, from setup to updates, right through to troubleshooting when it doesn't work.
The ready-to-use solution
A display like GlucyView takes the opposite approach: you have nothing to program. You switch it on, connect it to your Wi-Fi from a browser, enter your Dexcom Share or LibreLinkUp credentials, and it works. It's the right route if you want it to work straight away, to have a human contact if something goes wrong rather than a forum, and to manage neither a server nor firmware.
The real question: do you want a project, or a solution? If tinkering is part of the fun, DIY is for you. If you just want to see your glucose on a screen without spending your evenings on it, a ready-to-use display is the best choice.
8 criteria for choosing a ready-to-use display
1. Compatibility with your sensor
This is criterion number one. Most displays use the official sharing services: Dexcom Share for Dexcom and LibreLinkUp for FreeStyle Libre. Check the exact list of supported models, and above all those that are not supported. A reputable seller states this clearly (for GlucyView: the compatibility page).
2. An app to install… or not
Some displays are set up through a dedicated app, others directly from the phone's browser. Fewer apps means fewer updates, fewer accounts to create and less space taken up on your phone.
3. The path your health data takes
Ask yourself: does my data go through the seller's servers? The simplest and most private option is a direct path, from your manufacturer's service (Dexcom or Abbott) to the device, with no intermediate server and no storage by the seller.
4. Readability
A good display can be read from the other side of the room: large digits, a trend arrow and, above all, colours (green in range, orange out of range, red for urgent) that let you understand the situation without even reading the value.
5. Comfort at night
A screen that's too bright on a bedside table keeps you awake. Look for brightness control, ideally automatic thanks to a light sensor, for a soft display in the dark that's still readable in daylight.
6. Alerts
The display's alerts are a complement to those of your official app, never a replacement. Look at the number of levels (low, high, urgent), whether thresholds and melodies can be adjusted, and whether there's a reminder (snooze).
7. Power and portability
A display that also runs on battery can move from the living room to the bedroom without hunting for a socket, and stays visible during a power cut.
8. Support and guarantees
The first setup (Wi-Fi, sharing account) is when you're most likely to get stuck. Check that a real person answers, how quickly, and remember that in France you have a 14-day right of withdrawal after an online purchase.
Summary: the checklist
| Criterion | The right question |
|---|---|
| Compatibility | Is my exact sensor on the list? |
| App | Do I need to install and maintain yet another app? |
| Data | Does it go through the seller's servers? |
| Readability | Digits, trend and colours visible from afar? |
| Night | Adjustable brightness, ideally automatic? |
| Alerts | Adjustable thresholds and melodies, with reminder? |
| Power | Does it run on battery? |
| Support | Who answers, and how quickly? |
So where does GlucyView fit in?
GlucyView was designed by a person with diabetes who uses it himself every day. GlucyView was built around these criteria:
- compatible with Dexcom G5, G6, G7 and ONE+ (via Dexcom Share) and FreeStyle Libre 2 and 3, including Plus (via LibreLinkUp); not compatible with the original Dexcom ONE (without "+"), Dexcom G4 and FreeStyle Libre 1;
- no GlucyView app to install: setup is done from the phone's browser in a few minutes;
- no intermediate server: data goes from the Dexcom or Abbott cloud to the device, via your Wi-Fi, and GlucyView stores no health data;
- value shown in green, orange or red according to your thresholds, trend arrow, graph of the last 32 readings, combo mode and clock mode;
- automatic brightness thanks to a light sensor;
- 4 adjustable alert levels with melodies, reminder and intensive mode;
- runs on battery;
- setup assistance by email, within 24 business hours, and free delivery to a pickup point in France.
To compare all the ways of seeing your glucose at home: the full comparison · glucose screen · seeing your glucose without taking out your phone.
Frequently asked questions
Does a glucose display replace my reader?
No. It's a secondary screen for information purposes. Always keep your reader, your receiver or your official app, and their alerts, switched on.
Is a subscription required?
The Dexcom Share and LibreLinkUp services are provided by the manufacturers. Check with the display seller whether they charge a subscription: GlucyView does not.
What connection do you need?
A standard 2.4 GHz Wi-Fi network, and an active sensor whose app shares the data (Share or LibreLinkUp).
GlucyView is a display accessory for information purposes only and is not a medical device. It never replaces your official CGM reader or receiver. Do not make any treatment decision based on it alone. For any questions about your glucose targets, talk to your doctor.
