Everything you need to set up and use your GlucyView. This manual is updated regularly: this page always contains the latest version. Latest software version: 1.0.2 (29 October 2026). Features marked “version 1.0.1” or “version 1.0.2” do not exist on earlier versions: see chapter 15.
⚠ Read before use. GlucyView is a display accessory for informational purposes only and is not a medical device. It never replaces your official CGM meter, receiver or app (Dexcom, FreeStyle Libre), nor their alarms. Never make a treatment decision (insulin, treating a low) based solely on this display: always check the value in the official app. If in doubt or if you feel unwell, rely on your reference meter.
Contents
- In the box
- Before you start
- Turning on GlucyView
- Connecting GlucyView to Wi-Fi
- Linking a Dexcom sensor (Dexcom Share)
- Linking a FreeStyle Libre sensor (LibreLinkUp)
- Compatible sensors
- Everyday use
- The web interface (and several GlucyViews at home)
- Sound alerts
- Battery and care
- Reset
- Troubleshooting
- Technical specifications
- Software versions and updates
- Warranty, returns and recycling
- Safety and legal information
1. In the box
- The GlucyView display
- A USB cable
- A user manual
2. Before you start
- A 2.4 GHz Wi-Fi network. GlucyView does not work on 5 GHz. If your router shows two networks (for example “MyRouter” and “MyRouter-5G”), choose the one that does not say 5G. No Wi-Fi? A phone's hotspot works too (see chapter 4).
- A compatible, active sensor with sharing turned on: Dexcom Share or LibreLinkUp (see the list of sensors).
- The login details of the account to display: the wearer's Dexcom account, or a LibreLinkUp follower account.
3. Turning on GlucyView
Important: GlucyView does not turn on by itself when you plug it in.
To turn it on, press the left and right buttons at the same time and hold them for 3 seconds. The screen shows a short rainbow animation, then switches to setup mode if no Wi-Fi network has been saved yet.
4. Connecting GlucyView to Wi-Fi
- On your phone or computer, open the Wi-Fi settings and connect to the network created by GlucyView:
• Network name: GlucyWifi
• Password: glucyview - A setup page should open automatically. If not, open a browser and type http://192.168.4.1/
- Choose your 2.4 GHz Wi-Fi from the list, enter its password, then tap “Connecter” (Connect).
- GlucyView joins your Wi-Fi and restarts. An IP address is shown on the setup page: only note it down if you have several GlucyViews at home.
- Reconnect your phone to your usual Wi-Fi, then open http://glucyview.local/ in a browser to configure the device.
Tip: the address http://glucyview.local/ works at any time, as long as your phone and GlucyView are on the same Wi-Fi. If it doesn't open, use the IP address shown.
No fixed Wi-Fi (school, travel): using a phone's hotspot
GlucyView connects to any 2.4 GHz Wi-Fi network, including a phone's hotspot. For setup, simply choose that network at step 3 above.
- The hotspot must stay on with mobile data turned on, and the phone must stay close to GlucyView.
- On iPhone, turn on “Maximize Compatibility” in Settings, Personal Hotspot. On Android, choose the 2.4 GHz band.
- GlucyView only remembers one Wi-Fi network. To change network, use the “Reconfigurer le Wi-Fi” (Reconfigure Wi-Fi) button in the web interface, or use two GlucyViews (one for school, one for home).
- Keep GlucyView plugged in: its battery is only a backup battery.
Full guide: using GlucyView at school or without fixed Wi-Fi.
5. Linking a Dexcom sensor (Dexcom Share)
Sharing must first be turned on in the Dexcom account of the sensor wearer (Dexcom G6, G7 or ONE+):
- Open the Dexcom app on the wearer's phone.
- Go to the menu, then to “Connections”.
- Turn on “Dexcom Share” (in the Dexcom ONE+ app, it is called “Share”).
- In the GlucyView interface (RÉGLAGES / Settings tab), choose the “Dexcom Share” source and the server (Europe or USA), then enter the username and password of the wearer's account (the one used in the Dexcom app), not those of a Follower account.
Good to know: if you see “DEX:AUTH” even though the password is correct, try entering the Dexcom account's phone number instead of the email address.
Detailed guide: turning on Dexcom Share step by step.
6. Linking a FreeStyle Libre sensor (LibreLinkUp)
For FreeStyle Libre, it's the opposite of Dexcom: GlucyView uses a follower account, not the wearer's account.
- On the wearer's phone, open the LibreLink app and invite a loved one (“Share with a loved one” / LibreLinkUp) using the email address that will be the follower account.
- On another phone (or your own), install the LibreLinkUp app, create an account with that same email address and accept the invitation.
- Once the wearer's glucose appears in LibreLinkUp, go to the GlucyView interface (RÉGLAGES / Settings tab): choose the “LibreLinkUp” source and the region (Europe or World), then enter the email and password of the follower account.
Detailed guide: setting up LibreLinkUp and the follower account.
7. Compatible sensors
GlucyView never communicates directly with the sensor: it retrieves the glucose via the Dexcom Share or LibreLinkUp services, from what the official app is already sharing.
| Brand | Compatible | Not or poorly compatible |
|---|---|---|
| Dexcom | G6, G7 and ONE+ (Dexcom Share sharing built into the app). G5, where Dexcom still supports it. | The first Dexcom ONE, without the “+” (no Dexcom Share sharing) and G4 (requires a dedicated Share receiver). |
| FreeStyle Libre | Libre 2 and Libre 3 (including Plus): automatic real-time sharing via LibreLinkUp. | Libre 1 / Libre 14 Day: this sensor does not transmit continuously. The value only updates after each scan with the wearer's phone. |
In short: if the wearer's app can already share glucose in real time with a loved one, GlucyView will work. If in doubt, first check that sharing works on a phone. More details: is my sensor compatible?
8. Everyday use
The three buttons
| Button | Short press | Long press |
|---|---|---|
| Left | Previous mode | — |
| Middle | Refreshes the glucose immediately | 5 seconds: full reset (erases all settings) |
| Right | Next mode | — |
| Left + right together | 3 seconds: turn on GlucyView | |
During a long press on the middle button, a yellow, then orange, then red bar warns you. Release before red to cancel.
The 4 display modes
| Mode | Display |
|---|---|
| Glucose | The value in large digits, the animated heart and the trend arrow |
| Graph | The curve of the last 32 readings |
| Combo | A small graph on the left, the value on the right |
| Clock | The time, with the battery level at the bottom |
At the bottom of the screen, a thin line shows the battery level (Clock mode) or the time remaining until the next refresh (every 5 minutes). The four dots on the far right show the active mode. An orange dot appears if Wi-Fi is lost; since version 1.0.1, a red dot blinks when the battery is low (below 20%).
If the reading is too old (version 1.0.1 and later): when GlucyView has received no new reading for more than 20 minutes (wearer's phone disconnected from the sensor, sensor change, signal loss…), it shows “---” in gray, with no arrow, instead of an old value, and turns off the sound alerts. The value reappears as soon as a new reading is shared. On version 1.0.0, the last value stays displayed.
Choosing the unit: mg/dL or mmol/L (version 1.0.2 and later): in RÉGLAGES (Settings), the “Unité” (Unit) setting lets you display glucose in mg/dL (default) or in mmol/L, as in Switzerland, Canada or the United Kingdom. The screen then shows, for example, 7.8 instead of 140. The web page, the curve and the thresholds follow the chosen unit, and the thresholds are converted automatically. The colors and the alerts do not change.
The colors
| Zone | Default threshold | Color |
|---|---|---|
| Urgent low | 55 mg/dL or below (3.1 mmol/L) | Red |
| Low | 56 to 70 mg/dL (3.1 to 3.9 mmol/L) | Orange |
| In range | 71 to 199 mg/dL (3.9 to 11.0 mmol/L) | Green |
| High | 200 to 249 mg/dL (11.1 to 13.8 mmol/L) | Orange |
| Urgent high | 250 mg/dL or above (13.9 mmol/L) | Red |
These thresholds can be changed in the RÉGLAGES (Settings) tab of the web interface. Default thresholds for version 1.0.1 and later: on version 1.0.0, the default high threshold is 180 (in range: 71 to 179).
9. The web interface
Open http://glucyview.local/ (or the device's IP address) from a phone or computer connected to the same Wi-Fi.
- LIVE: the current glucose, the trend, the zone, the time since the last reading, the countdown to the next one and, since version 1.0.1, the battery level.
- GRAPH: recent history, with the high and low thresholds and dots colored by zone.
- RÉGLAGES (Settings): source (Dexcom Share Europe / USA or LibreLinkUp Europe / World), display unit mg/dL or mmol/L (since version 1.0.2), thresholds, 4 sound alerts, snooze and the sound of each alert (of your choice, with immediate playback since version 1.0.1), intensive mode, manual or automatic brightness (day/night and ambient light), 24-hour or 12-hour time, Wi-Fi reconfiguration button and, at the very bottom, the device name and the software version number (since version 1.0.1).
- Language: at the top left of the RÉGLAGES (Settings) tab, choose French, English, Spanish or Italian.
Several GlucyViews at home
By default, each GlucyView responds at the address glucyview.local. If you have several (for example one per child), give each one a different name:
- Set up the first GlucyView, then open http://glucyview.local/, RÉGLAGES (Settings) tab.
- At the very bottom, change the device name, for example to boitier1. It will then be reachable at http://boitier1.local/
- Set up the second GlucyView and give it another name, for example boitier2 (address http://boitier2.local/).
Each GlucyView displays the account assigned to it in its settings.
Adding GlucyView to your phone's home screen
- iPhone (Safari or Chrome): open http://glucyview.local/, tap the share icon, then “Add to Home Screen”.
- Android: open http://glucyview.local/, open the menu (⋮), then “Add to Home screen” or “Install app”.
10. Sound alerts
When an alert is enabled and the glucose crosses the threshold, GlucyView plays a sound. The alert is then paused (“snooze”) for the chosen duration, unless intensive mode is enabled: in that case it repeats every minute as long as the glucose stays in the zone.
If several thresholds are crossed, the order of priority is: urgent low, low, high, urgent high.
Choosing the sound of each alert (version 1.0.1 and later): in RÉGLAGES (Settings), open the alert and choose a sound from the list (Grave, Moyen, Aigu, Triple bip, Rapide, Long: low, medium, high, triple beep, fast, long). The sound is played on the device as soon as you select it, and the ▶ button lets you listen to it again. Remember to save afterwards. Advanced users can also enter their own melody in RTTTL format (the one used by old phone ringtones); this is the only option on version 1.0.0.
GlucyView's alerts are a complement. They depend on Wi-Fi and on the Dexcom or LibreLinkUp services, and may be delayed or missing. GlucyView's speaker is small: these are just simple beeps, not very powerful. Always keep the alarms of your official app or meter turned on.
11. Battery and care
- Battery: GlucyView is designed to stay plugged in. Its built-in battery is a backup battery (power cut, short move): it does not allow you to use it for a whole day without recharging it. The level is visible in Clock mode and in the web interface (since version 1.0.1), and a red dot blinks on the screen when it drops below 20% (since version 1.0.1). The higher the brightness, the faster the battery drains; automatic brightness is turned on by default on version 1.0.1.
- Charging: use the supplied USB cable and a standard 5 V USB charger.
- Safety: do not open the device, do not expose it to water or high heat (radiator, direct sunlight, car), and do not use it if it is damaged or swollen.
- Cleaning: dry or slightly damp cloth, with the device unplugged. Never use abrasive products or solvents.
12. Reset
| Method | Effect |
|---|---|
| Middle button held for 5 seconds | Erases everything (Wi-Fi, accounts, thresholds, alerts) and restarts as new. |
| “Reconfigurer le Wi-Fi” (Reconfigure Wi-Fi) button (web interface) | Erases only the Wi-Fi and restarts; the other settings are kept. |
13. Troubleshooting
| Symptom | Solution |
|---|---|
| The screen stays black when I plug in the cable | This is normal: turn it on by holding the left and right buttons for 3 seconds (see chapter 3). If the screen stays black, charge it, then do a reset (chapter 12). |
| I can't find the “GlucyWifi” network | Check that GlucyView is on and shows “AP”. If a Wi-Fi network is already saved, use the “Reconfigurer le Wi-Fi” (Reconfigure Wi-Fi) button or do a reset. |
| GlucyView won't connect to my router (or to the phone's hotspot) | Choose the 2.4 GHz network (not the 5G one) and check the password. On iPhone, turn on “Maximize Compatibility” in Personal Hotspot. |
| “WIFI?” scrolls across the screen | Wi-Fi has been lost. GlucyView retries every 15 seconds. Check that your router (or the hotspot) is on and within range. |
| “---” in gray instead of the value (version 1.0.1) | GlucyView has not received a new reading for more than 20 minutes. Check that the wearer's app is properly receiving the sensor (phone Bluetooth, sensor in place) and that Dexcom Share or LibreLinkUp sharing is working. The value comes back as soon as a reading is shared. |
| The displayed value doesn't match my app (for example 7.8 instead of 140) | GlucyView is set to mmol/L: 7.8 mmol/L corresponds to 140 mg/dL. Change the unit in RÉGLAGES (Settings) (version 1.0.2 and later). |
| “DEX:AUTH” | Dexcom login details rejected. Use the wearer's account (not a Follower account). If the email is correct, try the account's phone number. |
| “DEX:READ” | The login succeeded but reading failed. Check that a Dexcom sensor is active and sharing its data on this account. |
| “LLU:…” | LibreLinkUp error (login details, region or no shared wearer). Since version 1.0.1, “LLU:PAS DE DONNEE” (“no data”) means that LibreLinkUp has not sent any value yet (sensor change, signal lost): check that the follower account can see the glucose in the LibreLinkUp app. GlucyView retries on its own after a minute and a half. |
| No value is displayed | Wait for the next refresh (5 minutes) or briefly press the middle button. |
| The screen stays on “AP” | No Wi-Fi network is saved: go back to chapter 4. |
| http://glucyview.local/ won't open | Check that the phone is on the same Wi-Fi as GlucyView, or use its IP address. If you renamed the device, use its new name (for example http://boitier1.local/). |
Still stuck? Write to us at contact@glucyview.fr: a real person will answer.
14. Technical specifications
| Screen | 32 × 8 pixel LED matrix |
| Display unit | mg/dL or mmol/L, your choice (version 1.0.2) |
| Connectivity | 2.4 GHz Wi-Fi (router or a phone's hotspot) |
| Compatible sources | Dexcom Share, LibreLinkUp |
| Refresh | Every 5 minutes (or manual) |
| History displayed | Last 32 readings |
| Brightness | Automatic (light sensor) or adjustable |
| Power | USB 5 V; built-in backup battery |
| Software | Version 1.0.2 (29 October 2026) |
15. Software versions and updates
Which version do I have? Open http://glucyview.local/, RÉGLAGES (Settings) tab, at the very bottom: the version number is shown (for example “GlucyView v1.0.2”). If no number appears, your GlucyView has version 1.0.0.
| Version | Date | What's new |
|---|---|---|
| 1.0.2 | 29 October 2026 |
|
| 1.0.1 | 29 October 2026 |
|
| 1.0.0 | — | First version. |
Updating: software updates are carried out by us. If your GlucyView is on version 1.0.0 or 1.0.1 and you would like the latest version, write to us at contact@glucyview.fr.
16. Warranty, returns and recycling
- Right of withdrawal: 14 days from receipt. Details in our return policy.
- Legal guarantee of conformity: 2 years.
- Recycling: do not dispose of GlucyView with household waste. Take it to a collection point for electrical and electronic equipment (recycling center or a store that takes back such devices).
17. Safety and legal information
- GlucyView is a display accessory, not a medical device. It does not replace your official CGM meter, receiver or app.
- The values displayed may be delayed, incomplete or unavailable (Wi-Fi, service outage…).
- Do not make any treatment decision (insulin, treating a low, calling emergency services) based solely on GlucyView. If you have symptoms or are in doubt, always check with your reference device.
- Not suitable for children without adult supervision.
Seller: GlucyView, 38780 Pont-Évêque, France · contact@glucyview.fr · legal notice
Open-source software: GlucyView uses, among others, the FastLED, Adafruit GFX, FastLED_NeoMatrix and ArduinoJson libraries. Thanks to their authors.
Manual updated on 29 October 2026 (software version 1.0.2).