Diabetes Month

Set up GlucyView

Setting up GlucyView takes a few minutes, with no GlucyView app to download. Keep your phone close at hand, along with your Wi-Fi network name and password. For full details, see the complete user manual.

Before you start

  • A 2.4 GHz Wi-Fi network (most routers offer one; avoid the “5G” network).
  • An active compatible sensor, with sharing enabled: Dexcom Share (Dexcom G6, G7, ONE+, G5) or LibreLinkUp (FreeStyle Libre 2 and 3, including Plus).
  • The login details of the account to be displayed: the wearer's Dexcom account, or a LibreLinkUp follower account.

Sharing not set up yet? Follow our Dexcom Share or LibreLinkUp guides.

1. Turn on GlucyView

GlucyView does not turn on by itself when plugged in. Hold the left and right buttons at the same time for 3 seconds. A rainbow animation appears, then the screen shows that it is waiting for a Wi-Fi connection.

2. Join the GlucyView network

On your phone, open the Wi-Fi settings and connect to the GlucyWifi network, password glucyview. A configuration page opens automatically (if not, type http://192.168.4.1/ into a browser).

3. Connect GlucyView to your Wi-Fi

Choose your 2.4 GHz network from the list, enter its password and confirm. GlucyView joins your Wi-Fi, shows its address and then restarts.

4. Choose your sensor

Reconnect your phone to your usual Wi-Fi and open glucyview.local (or the address shown). In Settings:

  • Dexcom Share: login details of the wearer's Dexcom account, Europe or United States server;
  • LibreLinkUp: login details of the follower account, Europe or World region.

5. Customize

  • Thresholds: urgent low, low, high, urgent high. They control the screen colors (green, orange, red) and the alerts.
  • Alerts: enable the ones you want, choose the reminder interval and the melody. Intensive mode repeats the alert as long as the glucose stays out of range. Always keep the alarms in your official app enabled.
  • Display: automatic brightness (light sensor) or manual, 24-hour or 12-hour time format.
  • Interface language: French, English, Spanish or Italian.

Using the buttons

Button Action
Left + right (3 seconds) Turn on GlucyView
Left / right Change mode: Glucose, Graph, Combo, Clock
Middle (short press) Force an immediate update
Middle (long press, 5 seconds) Full reset (a progress bar warns you beforehand)

Reading the screen

  • The heart: the display is live.
  • The value and its color: green in range, orange out of range, red urgent.
  • The arrow: stable, rising or falling.
  • The bar at the bottom: the time remaining before the next reading (every 5 minutes).
  • The dots at the bottom right: the active display mode.

My browser shows a security warning on glucyview.local: what should I do?

This is normal, and safe on your home Wi-Fi: the GlucyView settings page uses “http”. Some browsers automatically try “https” and then show a warning. Type exactly http://glucyview.local, with “http://” at the start. If the warning still appears:

  • Firefox: click “Continue to HTTP Site”, or turn off HTTPS-Only Mode for this site.
  • Brave: in Brave Shields for this site, turn off the HTTPS upgrade (option “Don't upgrade HTTP connections”).
  • The simplest option: use Chrome, Edge, Safari or the browser on your phone connected to the same Wi-Fi as GlucyView.

The address doesn't open at all? Type GlucyView's IP address (for example http://192.168.1.25): you will find it in your router's list of connected devices. Finally, never set up GlucyView on a public Wi-Fi network.

Need help?

See the troubleshooting section of the manual, or write to us: a real person will reply by email within 24 business hours at contact@glucyview.fr.

GlucyView is a display accessory for informational purposes and is not a medical device. It never replaces your official CGM reader or receiver. Do not make any treatment decision based on it alone.